- Slide one axle mount through the slots at the front end of the car. Ther wire axle should be at the front end of the mount. Align the axle by matching the alignment marks on the mount with the body of the car. Glue the mount to the ar by applying a line of glue along the mount where it meets the body of the car
- Slide the other axle mount into the slots at rear end of car. The wire axle should be at the front end of the mount. Do not glue the mount to the car until the rear body panel is in place
- Cut out rear body panel. Score and bend on dotted lines. Glue in place at rear of car with tabs on the outside. Be sure to keep the car body square
- Align the rear axle mount as you did the front axle mount. Then glue in place
»
- Login to post comments