- Cut out pedestal sections (2), using a hobby knife to cut the small slots between the body of the pedestal and the tab.
- Glue pedestal sections together, back to back.
- Insert
pedestal into slot in base. Bend ends of pedestal tab in opposite
directions to help hold pedestal in place as shown. Glue pedestal to
base by applying a line of white glue along both sides of the tab. - Place
base flat on your work surface. Check to make sure pedestal is
straight. Then apply line of white glue along both sides of the
pedestal where it meets the base. Set aside to dry.
»
- Login to post comments