- Cut out fuselage sections (2), wing, and vertical stabilizers (4). Use a hobby knife to cut narrow slots as indicated.
- Score and bend leading edge of wing. Glue as shown.
- Glue vertical stabilizers together, back to back, to form two double thick stabilizers.
- Glue fuselage sections together, back to back.
- Glue
fuselage to wing by fitting the pieces together as shown and then
applying a line of white glue along each side of the fuselage where it
meets the wing. Apply glue both above and below the wing. - Glue stabilizers to wing tips, using the same technique. Set aside to dry.
- When
glue is completely dry, glue a penny to the underside of each wing tip.
Each penny should be placed so that it touches both the vertical
stabilizer and the edge of the wing. Since newer pennies are lighter
than older pennies, use either two new pennies, or two old pennies.
Glue the pennies in place as shown, using a drop of super glue.
»
- Login to post comments